Dr. Zakir Hussain Qamar
Head of Department
Department of Mathematics
Assistant Professor
This email address is being protected from spambots. You need JavaScript enabled to view it.

Dr. Zakir Hussain Qamar

Zakir Hussain received the MSc, MPhil and PhD degrees from Quaid-I-Azam University, Islamabad in 2011, 2014 and 2018, respectively. He received the PhD degree under the supervision of National Distinguished Professor Dr. Tasawar Hayat. He continuously focused on Mathematical Models Subject to Homogeneous and Heterogeneous reactions. He contributed more than 15 articles in well reputed international Journals during PhD degree. He was awarded merit scholarships for MPhil and PhD degrees at Quaid-I-Azam University. Currently, he is working as Assistant Professor and Head of the Department (HoD), Department of Mathematics at University Baltistan, Skardu.

1. June 2023- (Continue)
Data Science and Artificial Intelligence (DSAI)
National University of Sciences and Technology (NUST),
Islamabad, Pakistan

2. Fall 2022
Diploma in Artificial Intelligence (AI)
University of Baltistan, Skardu, Pakistan

3. 2014-2018
PhD in Fluid Mechanics.
Quaid-I-Azam University Islamabad, Pakistan

4. 2011-2013
MPhil in Applied Mathematics
Quaid-I-Azam University Islamabad, Pakistan

5. 2009-2011
MSc in Mathematics
Quaid-I-Azam University Islamabad, Pakistan
  1. Member of syndicate (2020)
  2. Convener for election procedure of Faculty members for the Senate, Syndicate, and Academic Counsel
  3. Convener of Examination for affiliated Colleges in Skardu region (2021)
  4. Sectary to Research Core Committee (2021 to date).
  5. Sectary to Representation Committee for Senate (2021).
  6. Member of Representation Committee to Senate (2021 to date).
  7. Member of Academic Counsel (2021 to date).
  8. Convener and member of departmental Board of Studies (2021 to date).
  1. Lecturer at College for Women (March 2011-August 2011)
  2. Lecturer at College for Women (September 2012-December 2013)
  3. Lecturer at Karakorum International University Gilgit (March 2014-December 2014)
  4. Senior Research Associate at Quaid-I-Azam University (November 2014-July 2018)
  5. Lecturer at Quaid-I-Azam University (Spring 2017-Fall 2017)
  6. Lecturer at College for Women (March 2018-December 2018)
  7. Assistant Professor as IPFP at the Department of Mathematics, University of Baltistan Skardu, Pakistan (December 2018-December 2019)
  8. Assistant Professor at Department of Mathematics, University of Baltistan Skardu, Pakistan (February 28, 2020, to date)
  1. Reviewer of more than 20 leading International Journals
  2. Published 38 plus articles in reputed Internal Journals
  3. More than 150 Impact Factors
  4. Merit Scholarship during PhD at Quaid-I-Azam University Islamabad
  5. Merit Scholarship during MPhil at Quaid-I-Azam University Islamabad
  6. Player of Hockey and Athletic at Quaid-I-Azam University Islamabad
  7. Participated in varsity Hockey and Athletic Championships (2012)
  1. Mathematical Modelling
  2. Computation Fluid Dynamics
  3. Newtonian and non-Newtonian Fluids
  4. Numerical Simulation
  5. Blood Flow
  6. Boundary layer flow
  7. Data Science
  8. Machine Learning
  9. Data-Driven solution
  10. Artificial Intelligence
  11. Physics Inform Neural Network (PINN)
  12. Deep Learning
  13. Image Processing
  1. ANSYS software
  2. COMSOL Multiphysics software
  3. Homotopy and Optimal Homotopy Analysis Method
  4. Bvp4c Matlab Solver
  5. Keller Box Method
  6. Finite Element Method
  7. Finite Volume Method
  8. Python
  9. MATLAB

Subjects Taught at Graduate and Undergraduate Level

  1. Machine Learning
  2. Mathematics for Machine Learning
  3. Artificial Intelligence
  4. Linear Algebra
  5. Software Packages
  6. Calculus
  7. Fluid Dynamics
  8. Heat Transfer analysis
  9. Green Energy
  1. 7th International Conference on “Recent Developments in Fluid Mechanics and Environmental Sciences” at Quaid-I-Azam University, Islamabad, 13th February to 15th February
  2. 5th International Conference on “Recent Developments in Fluid Mechanics” at Quaid-I-Azam University, Islamabad, 24th June to 26th June
  3. 4th International Conference on “Recent Developments in Fluid Mechanics” at International Islamic University, Islamabad, 3rd August to 5th August
  1. Nanofluid flow through a porous space with convective conditions and heterogeneous- homogeneous reactions at Department of Mathematics Quaid-I-Azam University Islamabad 23 April
  2. A computational study for CNTs nanofluid with renovated Hamilton-Crosser and Xue models past a stretching cylinder at Department of Mathematics Quaid-I-Azam University Islamabad 19 September
  1. Computer Methods and Programs in Biomedicine
  2. Informatics in Medicine
  3. International Journal of Applied Mechanics and Engineering
  4. Journal of the Egyptian Mathematical Society
  5. Heat and Mass Transfer
  6. Results in Physics
  7. Scientia Iranica
  8. Scientific Reports
  9. Canadian Journal of Physics
  10. Physica A
  11. Multi-Discipline in Materials and Structure
  12. Journal of Process Mechanical Engineering
  13. International Journal of Mechanical Sciences
  14. Heat Transfer Asian Journal
  15. Colloids and Surface B and others

Publications (Total Impact Factors 150 Plus)

  1. Zakir Hussain, M. Alghamdi, S. Ali, M.R. Ali, and M. Aslam, (2023) Significance of mixed convective heat transfer model in an equilateral triangular enclosure subjected to cylindrical heated objects inside. Case Studies in Thermal Engineering, p.103027. Impact Factor 6.2
  2. Metib Alghamdi, Bushra Fatima, Zakir Hussain, Zahid Nisar, and Huda Ahmed Alghamdi (2023) "Peristaltic pumping of hybrid nanofluids through an inclined asymmetric channel: A biomedical application." Materials Today Communications 105684. Impact Factor 3.42
  3. Muhammad Shoaib Anwar, Zakir Hussain (2022), Heat convection in a viscoelastic nanofluid flow: A memory descriptive model, Journal of Applied Nonlinear Dynamics Impact Factor 0.74.
  4. Muhammad Shoaib Anwar, Zakir Hussain (2022), Clay based cementitious nanofluid flow subjected to newtonian heating, International Journal of Modern Physics B, 2350140. Impact Factor 1.42
  5. Zakir Hussain, Zeenat Bashir, and M. S. Anwar (2022), Analysis of nanofluid flow subject to velocity slip and Joule heating over a nonlinear stretching Riga plate with varying thickness, Waves in Random Complex Media1-17.Impact factor 3.41
  1. Muhammad Shoaib Anwar, Zakir Hussain (2022), Fixed points in n-gonal graphical b-metric spaces un contractive condition, International Journal of Modern Physics-B. Impact Factor 1.42
  2. Zakir Hussain, Muhammad, Ali Saleh Alshomrani, Taseer Muhammad and Muhammad Shoaib Anwar (2022), Entropy analysis in mixed convective flow of hybrid nanofluid subject to melting heat and chemical reactions, Case Studies in Thermal Engineering 34, 101972. Impact Factor: 51
  3. Muhammad Shoaib Anwar, Muhammad Irfan, Majid Hussain, Taseer Muhammad and Zakir Hussain (2022), Heat transfer in a fractional nanofluid flow through a permeable medium." Mathematical Problems in Engineering Impact Factor: 1.305
  1. Zakir Hussain, M. Ashraf, M.S. Anwar and M. Farooq. (2022) “Analysis of Cattaneo– Christov heat flux in Jeffery fluid flow with heat source over a stretching cylinder.” Journal of Thermal Analysis and Calorimetry. (00) 1-12. Impact Factor: 5.12
  1. Ikram Ullah, Sayed Irfan Shah, Gul Zaman, Taseer Muhammad and Zakir Hussain (2022) "Passive control of magneto-nanomaterials transient flow subject to non-linear thermal radiation." Thermal Science 26, 1405-1419. Impact Factor: 1.625
  1. Zakir Hussain, Tasawar Hayat, Ahmed Alsaedi, and Muhammad Shoaib Anwar (2021) Mixed convective flow of CNTs nanofluid subject to varying viscosity and reactions." Scientific Reports (11) 1-14. Impact Factor: 4.54
  2. Zakir Hussain, Saima Muhammad and M.S. Anwar, (2021) “Effects of first-order chemical reaction and melting heat on hybrid nanoliquid flow over a nonlinear stretched curved surface with shape factors.” Advances in Mechanical Engineering (13) 1687814021999526. Impact Factor: 1.70
  3. Zakir Hussain and Taseer Muhammad (2021) Simultaneous influence of Hall and wall characteristics in peristaltic convective carbon water flow subject to soret and dufour effects, Arabian Journal for Science and Engineering (46) 2033-2046. Impact Factor: 3.08
  1. Mahnoor Khan, Amer Rasheed, Muhammad Shoaib Anwar, Zakir Hussain, and Tahir Shahzad (2021) "Modelling charge carrier transport with anomalous diffusion and heat conduction in amorphous semiconductors using fractional calculus." Physica Scripta (96) 045204. Impact Factor: 2.99
  2. Imtiaz Ali, Amer Rasheed, Muhammad Shoaib Anwar, Muhammad Irfan, and Zakir Hussain (2021) "Fractional calculus approach for the phase dynamics of Josephson junction." Chaos, Solitons & Fractals 143 Impact Factor: 9.922
  1. Zakir Hussain, Tasawar Hayat, Ahmed Alsaedi, and Ikram Ullah. (2021) "On MHD convective flow of Williamson fluid with homogeneous-heterogeneous reactions: A comparative study of sheet and cylinder." International Communications in Heat and Mass Transfer 120 Impact Factor: 6.78
  2. Zakir Hussain. (2020) “Heat transfer through temperature-dependent viscosity hybrid nanofluid subject to homogeneous-heterogeneous reactions and melting condition: A comparative study”. Physica Scripta (96) Impact Factor: 2.99
  1. Hayat, F. Shah, Zakir Hussain and A. Alsaedi. (2020) “Outcomes of double stratification in Darcy–Forchheimer MHD flow of viscoelastic nanofluid, Journal of the Brazilian Society of Mechanical Sciences and Engineering (42) 1-1. Impact Factor: 2.44.
  1. Hayat, F. Shah, Zakir Hussain and A. Alsaedi. (2019) “Darcy Forchheimer flow of Jeffrey nanofluid with heat generation/absorption and melting heat transfer.” Thermal Science (23) 3833-3842. Impact Factor: 1.625
  2. Zakir Hussain, Tasawar Hayat, Ahmed Alsaedi and Bashir Ahmed. (2018) “Darcy Forhheimer aspects for CNTs nanofluid past a stretching cylinder; using Keller box method”. Results in Physics (11) 801-816. Impact Factor: 4.62
  1. Hayat, Zakir Hussain, A. Alsaedi and T. Muhammad. (2018) “An optimal solution for magnetohydrodynamic nanofluid flow over a stretching surface with constant heat flux and zero nanoparticles flux”. Neural Computing and Applications (29) 1555-1562. Impact Factor: 5.60
  2. Hayat, T., F. Shah, Zakir Hussain, and A. Alsaedi (2018) "Outcomes of double stratification in Darcy–Forchheimer MHD flow of viscoelastic nanofluid." Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 1-11. Impact Factor: 2.44
  1. Zakir Hussain, Tasawar Hayat, Ahmed Alsaedi, and Bashir Ahmad. (2018) "Three-dimensional convective flow of CNTs nanofluids with heat generation/absorption effect: a numerical study. “Computer Methods in Applied Mechanics and Engineering (329) 40- 54. Impact Factor: 6.51
  2. Hayat, Zakir Hussain, M. Farooq and A. Alsaedi. (2018) “MHD flow of Powell- Eyring fluid by a stretching cylinder with Newtonian heating”. Thermal Science (22) 371-381. Impact Factor: 1.625
  3. Hayat, Zakir Hussain, A. Alsaedi and M. Mustafa. (2017) “Nanofluid flow through a porous space with convective conditions and heterogeneous–homogeneous reactions”. Journal of the Taiwan Institute of Chemical Engineers (70) 119-126. Impact Factor: 5.23
  4. Hayat, Zakir Hussain, M. Farooq and A. Alsaedi. (2017) “Homogeneous and heterogeneous reactions effects in flow with Joule heating and viscous dissipation”, Journal of Mechanics (13) 77-86. Impact Factor: 4.83
  5. Hayat, Zakir Hussain, A. Alsaedi and A. Hobiny. (2017) “Computational analysis for velocity slip and diffusion species with carbon nanotubes”, Results in Physics (7) 3049- 3058. Impact Factor: 4.62
  6. Hayat, F. Shah, A. Alsaedi and Zakir Hussain. (2017) Outcome of homogeneous and heterogeneous reactions in Darcy Forchheimer flow with nonlinear thermal radiation and convective condition”, Results in Physics (7) 2497-2505. Impact Factor: 4.62
  7. Hayat, Zakir Hussain, A. Alsaedi and B. Ahmed (2017) “Numerical study for slip flow of carbon–water nanofluids”, Computer Methods in Applied Mechanics and Engineering (319) 366-378. Impact Factor: 6.51
  8. Hayat, Zakir Hussain, B. Ahmed and A. Alsaedi. (2017) “Base fluids with CNTs as nanoparticles through a non-Darcy porous medium in convectively heated flow: A comparative study”, Advanced Powder Technology (28) 1855-1865. Impact Factor: 4.84
  1. Hayat, Zakir Hussain, A. Alsaedi and M. Farooq. (2016) “Magnetohydrodynamic flow by a stretching cylinder with Newtonian heating and homogeneous-heterogeneous reactions”, PloS one (11), e0156955. Impact Factor: 3.58
  1. Hayat, Zakir Hussain, A. Alsaedi and S. Asghar. (2016) “Carbon nanotubes effects in the stagnation point flow towards a nonlinear stretching sheet with variable thickness”, Advanced Powder Technology (27) 1677-1688. Impact Factor: 4.84
  1. Hayat, Zakir Hussain, A. Alsaedi and B. Ahmad. (2016) “Heterogeneous- homogeneous reactions and melting heat transfer effects in flow with carbon nanotubes”, Journal of Molecular Liquids (220) 200-207. Impact Factor: 6.21
  1. Hayat, Zakir Hussain, M. Farooq and A. Alsaedi. (2016) “Effects of homogeneous and heterogeneous reactions and melting heat in the viscoelastic fluid flow”, Journal of Molecular Liquids (215) 749-755. Impact Factor: 6.21
  2. Tasawar Hayat, Zakir Hussain, Taseer Muhammad and Ahmed Alsaedi. (2016) "Effects of homogeneous and heterogeneous reactions in flow of nanofluids over a nonlinear stretching surface with variable surface thickness", Journal of Molecular Liquids (221) 1121-1127. Impact Factor: 6.21
  3. Hayat, Zakir Hussain and A. Alsaedi. (2016) “Influence of heterogeneous- homogeneous reactions in thermally stratified stagnation point flow of an Oldroyd-B fluid”, Results in Physics (6) 1161-1167. Impact Factor: 4.62
  4. Hayat, Zakir Hussain, M. Farooq, A. Alsaedi and M. Obaid. (2014) “Thermally stratified stagnation points flow of an Oldroyd-B fluid”, International Journal of Nonlinear Sciences and Numerical Simulation (15) 77-86. Impact Factor: 2.18